General Use Furniture Raiser on castors (no legs)

For armchairs, settees and beds on castors only. Two blocks linked by an adjustable bar. Designed to raise the height of a clients own chairs or bed. A pair of units will be required to raise a chair. Additional units may be required to raise settees or beds.

When ordering make sure correct amount of raiser units, spreader bars and clip on raisers are ordered.

Multi-raisers are designed to accept corners, straight edges or curves on the furniture.

• Width adjustment – approx 800mm – 1300mm
• Height raise range – approx 75mm – 150mm
• Minimum weight limit – 254kgs (40st)

For guidelines on ordering, see Chair Raiser chart_ (288KB - pdf help)

This item must be ordered using a retail prescription                                                                                         

Retail Model Order Codes:

Support Unit

1 support unit = 2 cups (for 2 castors)

Order Code: FU02

Spreader Bars

Order code : FU02S

Clip-On Raisers

1 raiser per cup, order enough raisers to achieve required height for each cup

Order code : FU02C

Retail Model - see Devon Tariff document for details.

CES Order Codes:

Support Unit 1 support unit = 2 cups (for 2 castors)

Order Code: HOS 0826

Spreader Bars

Order code : HOS 0827

Clip-On Raisers1 raiser per cup, order enough raisers to achieve required height for each cup

Order code : HOS 0828

Chair Raisers for chairs with legs

Four blocks linked by an adjustable frame or two pairs of adjustable linked blocks.

Designed to raise the height of a clients own chair.

For chairs with legs.(with or without castors on the leg)

• Maximum user weight : 254 kg (40 stone)

When ordering please state height of raise required (not height of chair).

Price band B

Jan 11

This item must be ordered using a retail prescription

Retail Model Order Code: FU01

Retail Model -See Devon Tariff document for details

CES Order Code : HOS 0821

Linked Double Bed Raiser (pair) for Beds on Legs

Two blocks linked by an adjustable frame. Designed to raise the height of clients own single or double bed with legs. Dependent on the design of bed, two, three or four pairs may be required.

• Minimum weight limit: 254kg (40 stone)
• Height Raise range – approx 75mm to 165mm

When ordering please state height of raise required (not height of chair/bed).

Price band B

Nov 11

This item must be ordered using a retail prescription

Retail Model Order Codes:

Linked single bed raiser FU15S

Linked double bed raiser FU15D

Retail Model - see Devon Tariff document for codes and details.

CES Order Code :BED 0047

Chair / Bed Raisers, Grip On (Set of 4)

For furniture on legs or castors check diameter of leg or castor for tight fit with raising unit. All units come with 1" add on sections. State measurement required e.g. 1", 2" or 3".raise

• Maximum user weight : 318 kg (50 stone)

CES Order Codes:

1.5" (4cm) (Diameter) Order Code     HOS 0829

2" (5 cm) (Diameter) Order Code     : HOS 0830

2.5" (6.5cm) (Diameter) Order Code : HOS 0831

(All the above come as a set of 4 with 2 add-on sections per unit)

MacNish Chair Riser

A raising unit added to standard static chairs. Can be fitted with vertical lift or lift and tilt. Meximum height can be set when fitting. Unit is screwed to underside of chair. Prescriber and technician required for joint visit when fitting. Read prescriber guidelines before ordering

The unit is controlled by a simple hand switch, which will stop the chair's motion when pressure is taken off the button

• Adjustable height and tilt to suit the users needs
• Vertical lift or rise and tilt option
• Easily fitted and removed by technician
• Uses your existing chair
• Fits to nearly all armchair types

Not to be fitted to Rise Recline or Riser Chairs

Note: This product must be ordered with a joint visit from Prescriber and Technician.

Price Band E

prescribing_guidelines_macnish_chair_raiser (7KB - pdf help)

Oct 10

CES Order Code: MOV 0752